SDI to DVB-S/S2 Satellite Modulator
HD/SD-SDI 720p/1080i/1080p Encoder + Satellite DVB-S/S2 Modulator
It is an integrated HD encoder with DVB-S/S2 modulator - HD up to 1080p HD/SD-SDI input, H.264 / MPEG2 encoding.
It also has ASI input, for passing external TS from a different encoder or muxing external TS with the TS our unit encodes.
It is an integrated HD encoder with DVB-S/S2 modulator - HD up to 1080p HD/SD-SDI input, H.264 / MPEG2 encoding.
It also has ASI input, for passing external TS from a different encoder or muxing external TS with the TS our unit encodes.
Thor DVB-S/S2 Encoder & Modulator is an integrated HD Video Encoder with the satellite S2 modulator. Hot-swappable modules with different video inputs (CVBS/SDI/HDMI/YPbPr...) are available.
It also has 1 channel ASI input for external TS (MPEG2 or H.264) multiplexing. It outputs ASI and DVB-S/S2 RF (IF Optional) simultaneously.
The signal source could be an SDI camera, HDMI Blu-ray players, etc. It has a web-based NMS GUI interface for easy online management.
Featuring high performance and low cost, the S2 is especially used by TV stations or DSNG systems to encode SD/HD programs and output for uplink.
- Convert HD-SDI or HDMI or Component YPbPr HD video to a satellite-modulated carrier
- Any SDI or HDMI & YPbPr inputs up to 720p/1080i/1080p
- Licensed HDMI inputs
- Closed captions supported on 608 analog inputs
- Supports DVB-S/S2 RF (IF Optional - Model Specific) output and ASI output
- Output frequency: 950-2150MHz; or IF: 50-200MHz (Model Specific)
- Supports 10MHz reference clock
- ASI input for additional TS multiplexing from any other encoder
- Full IP control and network management through browser
- Front panel LCD local control
- IPTV output: Unicast or Multicast IGMP UDP (optional)
- ASI output with multiplexer cherry-picking
- Low latency available 70-120 ms
- AC3 audio available (AC3 model)
- MPEG2 video or MPEG4 H.264 encoding
- Support RF 24V power output
- Other video input cards available - hot swappable - SDI Card, YPbPr Card, HDMI Card
- 5 Year Warranty - Free Tech Support - Cables and Power Supply included
TWO MODELS AVAILABLE: L-band or IF (Intermediate Frequency)
1) H-1SDI-DVBS with ( 950Mhz - 2100Mhz) L-band RF output
2) H-1SDI-DVBS-IF with IF (50-200mhz) RF output
Base Main Model H-1SDI-DVBS2 has 1 HD/SD-SDI input and L-Band RF DVB-S/S2 Output
| The configuration page for S2 modulator with L-band 950-2100 Mhz RF output; or IF: 50-200MHz | |||
|
H-1SDI-DVBS H-1SDI-DVBS-IF |
1 HD/SD-SDI Input / L-Band RF DVB-S/S2 Output 1 HD/SD-SDI Input / IF Output |
||
|
H-1HDMI-DVBS H-1HDMI-DVBS-IF |
1 HDMI video Input / L-Band RF DVB-S/S2 Output 1 HDMI Input / IF Output |
||
|
H-1CVBS-DVBS H-1CVBS-DVBS-IF |
1 CVBS Video Input / L-Band RF DVB-S/S2 Output 1 Analog CVBS Input / IF Output |
||
|
H-1RGB-DVBS H-1RGB-DVBS-IF |
1 YPbPr Video Input / L-Band RF DVB-S/S2 Output 1 YPbPr Video Input / IF Output |
||
| Low 70-250mn latency models available | |||||||||
|
SDI or HDMI or YPbPr or CVBS up to 1080P60 | ||||||||
|
1280x720P 60 / 59.94 / 50 Hz 1920*1080_60P, 1920*1080_50P, (-for MPEG4 AVC/H.264 only) 1920*1080_60i, 1920*1080_50i, 1280*720_60p, 1280*720_50P 720*480_60i, 720*576_50i
|
||||||||
|
MPEG-2 HD 1.5-19.5 Mbps H.264 HD 0.8-19.5 Mbps |
||||||||
|
MPEG-1 Layer II MPEG-2 AAC MPEG-4 AAC AC3 Dolby Audio Dolby Passthrough |
||||||||
|
48 kHz | ||||||||
|
64 kbps, 96 kbps, 128 kbps, 192 kbps, 256 kbps, 320 kbps | ||||||||
|
DVB-S/S2 RF (IF Optional) output; ASI output
|
||||||||
|
RF output: 950.00-2150.00 MHz, 10Khz step | ||||||||
|
Output level: -10db~-41.5db | ||||||||
|
BNC Connector: 1-60 Mbps | ||||||||
|
BNC Connector: 1-120 Mbps Programs Selected by PID Programs Muxed to all Outputs |
||||||||
|
MPEG-TS MPTS over UDP Unicast and Multicast Supported |
||||||||
|
100-240 VAC Auto Switching ~ 20 W |
||||||||
|
19 x 17 x 2 Inches | ||||||||
|
9 Pounds | ||||||||
|
32-110 F | ||||||||