4 Ch Video Over Fiber
Fiber Optic Media Converter 4Ch Video
F-4V-Tx and F-4V-Rx - 4 video over fiber
F-4VD-TX and F-4VD-RX 4 Video and return RS485 Data over fiber
Thor Fiber 4 Channel Composite Video over Fiber Transmitter and Receiver for easy transport of all your video over a single-mode (20km) or multimode(3000ft) fiber.
There are many high-end security cameras out there that still shoot in the standard composite video. Our line of F-SEC fiber transmitters is designed to extend the life of this equipment. Our fiber optic security transmitters still use the same high-end 10-bit digital encoding that our broadcast transmitters use, just in a less expensive chassis. We offer many different configurations and services with this line of products. In addition to video, we can also carry data, Ethernet, telephone, or audio in the same unit. Speak with a sales representative today to discuss specific options and pricing. Our units come with standard single-mode optics with a transmitting distance of up to 20 km. Other options for special wavelength optics and power outputs are available upon request. The F-4V-TX/RX is a 4 video over fiber TX/RX kit, the F-4VD-TX/RX is a 4 Video in one direction, and an RS485 in the opposite direction TX/RX kit
- 4-Channel CVBS Analog Video Input Compatibility** – Supports NTSC, PAL, and SECAM formats
- Blackburst / Genlock & Synchronization** – Ensures stable, synchronized video transmission
- RS485 Control Data Transmission** – Allows control data to flow back from receiver to transmitter
- LED Status Indicators** – Monitor power, video, and audio signal status easily
- Digital Processing & Transmission** – No calibration required for consistent performance
- Single Mode / Multimode Fiber** – Flexible fiber options for various network needs
- Extended Range Options** – Available for distances of 20 km, 40 km, or 80 km
- High-Quality Sampling** – 10 MHz video sampling rate for superior signal clarity
- ST / PC Optical Connector** – Reliable, industry-standard optical connectors
- Bidirectional Control Support** – Enables remote device operation over fiber
Model Selection
F-4VD-TX / RX - CVBS forward + return RS485 Data over fiber TX/RX kit -20Km
F-4V-TX / RX - CVBS over fiber TX/RX kit - 20Km
40, 80,120Km vesions , XX=40,80,120 in Km
F-4VD-TX / RX-XX
F-4V-TX / RX-XX
| Video | |
|
8.0 MHz |
|
10 - bit |
|
1% typical |
|
1 typical |
|
>67 dB |
| Audio | MODEL DEPENDENT: The base model does not support analog audio |
|
20Hz ~ 20KHz |
|
24 - bit |
|
> 75 dB |
|
<0.1% |
| Data | |
|
Return unidirectional RS-485 - default on the F-4VD-TX/RX (RS232/422 are available as a special order only) |
|
Full-duplex/Half-duplex |
|
D<10-9 LxWxH 7.5 x 6.75 x 1.25 ( including connectors)
5VDC 1A Power supplies -incuded |