16 mW CATV RF Over Fiber Tx 45-870 MHz
RF over Fiber Tx - 16mW Output 45-870 MHz
1310nm – 16mW fiber optic transmitter designed for transporting Television RF signals over fiber within the 45–1000 MHz range. Supports all RF formats including Analog RF (NTSC / PAL), Digital QAM (J.83B), ATSC antenna signals, ATSC 8VSB, ATSC 3.0, and QPSK within band.
The unit converts incoming RF into optical RF, allowing all channels to be carried over a single fiber. Suitable for both point-to-point links and point-to-multipoint distribution using optical splitters.
With increased optical power, this model is ideal for 1x8, 1x16, or 1x32 splitter configurations, making it perfect for hotels, multi-dwelling units, antenna distribution systems, and campus RF networks.
Outputs industry-standard RFoG signals compatible with most third-party receivers. Features a highly linear DFB laser with Automatic Gain Control (AGC) for stable, low-distortion performance. Front panel LCD enables easy monitoring and configuration. Optional redundant power supply available.
Transmitter can be used with any or Thor Fiber optical RF receivers
• 16 mW Optical Power Output from sensor feedback controlled laser system
• Transports entire 45-870 MHz band even with full channel linups
• Create high security "Fiber Breaks" to eliminate coax signal return path
• Automatic Gain Control (AGC) manages RF level with no adjustment needed
• Compatible with all Thor RFoG CATV series optical receiver systems
IMPORTANT NOTE*** (it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections.
If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion.
The following CATV RF fiber optic transmitters are available. You can view all models here: CATV RF over Fiber Transmitters
- F-RF-TX-MN-2mW – Mini CATV RF Fiber Optic Transmitter, 1310 nm, compact design, 2 mW laser
- F-RF-1310-TX-4mW – CATV RF Fiber Optic Transmitter, 1310 nm, 45–1000 MHz, 4 mW laser
- F-RF-1310-TX-8mW – CATV RF Fiber Optic Transmitter, 1310 nm, 45–1000 MHz, 8 mW laser
- F-RF-1310-TX-16mW – CATV RF Fiber Optic Transmitter, 1310 nm, 45–1000 MHz, 16 mW laser
- F-RF-1310-TX-32mW – CATV RF Fiber Optic Transmitter, 1310 nm, 45–1000 MHz, 32 mW laser
- F-RF-1550-TX-8mW – CATV RF Fiber Optic Transmitter, 1550 nm, 45–1000 MHz, 8 mW laser
| *All Specifiactions Subject to Change Without Notice | |||
|
1x Type-F connector - 75 Ohm |
||
|
1310nm | ||
|
< 1 MHz FWHM | ||
|
>20 dB XP | ||
|
< -160 dB/Hz | ||
|
16 mW | ||
|
>55 dB | ||
|
SC/APC - Angle Polished IMPORTANT NOTE*** (it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections. If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion. |
||
|
11-29 dBmV AGC Managed | ||
|
<± 0.75 45 - 862 MHz | ||
|
>17 dBm | ||
|
>50 dB @ 10km fiber length | ||
|
< -63 dB | ||
|
< -57 dB | ||
|
19 x 10 x 1.75 inch | ||
|
2.5 kg | ||
|
0 - 45 ? | ||