1 L-Band LNB Dish over fiber Extender with Outdoor Enclosure

PN: F-LB11-TxRx
Description

F-LB11 Weatherproof Outdoor L-Band Kit

Ruggedized, environmentally hardened optical transmitter and receiver kits

These single-channel L-Band over fiber kits offer the same link performance as standard Thor F-LBAND systems and are suitable for outdoor installation. Ideal for mounting on antenna masts or in base station equipment racks, F-LB11 single-channel kits can be installed in locations directly exposed to the elements.

Features
  • Can be installed in any location, indoors or out
  • Allows optical transmitter to be mounted closer to the antenna
  • Fully sealed enclosure can be installed directly on the antenna
  • Can be ordered for a specific frequency range response
  • Wide range of applications; bi-directional models available

IMPORTANT NOTE*** (It is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections.)

If your fiber is terminated with the SC, ST, FC/PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion.

Drawings
Specification
*All Specifications Subject to Change Without Notice
Transmitter Properties
  • Wavelength

1310 nm (standard)

1550 nm (optional) FP/DFB

  • Output Power
+2.0 dBm +/- 2 dB
  • Frequency Response Range
45 - 2800 MHz
  • RF Input Level
55 - 78 dBuV
  • LNB Power (optional)
13 or 18 VDC / 650mA Max 22KHz
  • RF Connector
F-Connector or by request
  • RF Return Loss
13 dB
  • RF Input Impedance
75 Ohm
  • CNR
40 dB
  • IMD
40 dB
Receiver Properties
  • Wavelength
1290 - 1600 nm
  • Optical Input Power Range
-13 - 1 dBm (sensitivity -13 dBm)
  • Frequency Range
900 - 2600 MHz
  • Output RF Response Levels
  • Optical Input = 0 dB
RF Output = 88 dBuV
  • Optical Input = -3 dB
RF Output = 82 dBuV
  • Optical Input = -6 dB
RF Output = 74 dBuV
  • Optical Input = -9 dB
RF Output = 68 dBuV
  • Optical Input = -12 dB
RF Output = 63 dBuV
General Parameters
  • Power Supply Info
18VDC, 3.5W
  • Temperature Range
(-45) - 150 F
  • RF Connectors

F-Connector

  • Optical Connectors

SC/APC

IMPORTANT NOTE*** (It is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections.)

If your fiber is terminated with the SC, ST, FC/PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion.

  • Dimensions
118 mm x 210 mm x 40 mm
  • Weight
0.25 kg
Question and Answers
Availability:In stock
Condition:New
Shipping:starting at $22.00
Warranty:2Yrs
Price:$2,495.00